Question 95 vfr750 positioning sound deadening behind fairing

razorbold

Registered User
Hello
would anyone be able to help me with the correct way to position these 2 panels behind the fairing.
i got the bike with these panels loose in a bag and I can't see in the haynes manual where they go.
any help would be gratefully appreciated
Thanks
 

Attachments

Sye

V-Twin and V4 Aficionado
Site Sponsor
Hanonamo, they are almost correct. The thin end has a cut-out that goes over the fairing stay and the plastic tie goes around the smaller inner frame tubes. You should also have some witness marks that show the outline of the covers on the padding.
 

Sye

V-Twin and V4 Aficionado
Site Sponsor
No, I've edited your image. There's a slot where the arrow is pointing that slides over the attachment post circled. The top edge follows the sloping frame brace and the plastic tie goes around the brace. The pad sits flush on the outer face.
 

Attachments

Sye

V-Twin and V4 Aficionado
Site Sponsor
The other one goes on the same way but on the opposite side. Pic attached.
 

Attachments

Sye

V-Twin and V4 Aficionado
Site Sponsor
It goes between the tank and the frame. Should be one either side towards the front.
 
Top